• Breaking News

    Tuesday, November 3, 2020

    Home Unlabelled Wood carving Tiny marauder with detachable war hammer carved with a Swiss Army knife in basswood.

    Wood carving Tiny marauder with detachable war hammer carved with a Swiss Army knife in basswood.

    November 03, 2020

    Wood carving Tiny marauder with detachable war hammer carved with a Swiss Army knife in basswood.

    Tiny marauder with detachable war hammer carved with a Swiss Army knife in basswood.

    Posted: 03 Nov 2020 02:49 AM PST

    Here’s a statue I carved and painted �� based on the Paleolithic Venus of Willendorf. This was my first completed carving, thought I’d share ��

    Posted: 02 Nov 2020 11:43 AM PST

    This is my new sheath! Now all my carving knifes are dressed pretty lol.

    Posted: 03 Nov 2020 09:29 AM PST

    Another little guy, in the books!

    Posted: 03 Nov 2020 09:56 AM PST

    I made coconut shell skull pendants | key tags

    Posted: 03 Nov 2020 09:15 AM PST

    I have this woodcarving/working(?) kit, is it handy? Is it good? Is it even for woodcarving/working?

    Posted: 03 Nov 2020 05:16 AM PST

    Baby spoon

    Posted: 03 Nov 2020 06:47 AM PST

    Does anyone know a good video tutorial for sharpening woodcarving tools?

    Posted: 03 Nov 2020 10:21 AM PST

    I bought my first woodcarving set off Amazon, but they need to be sharpened and I am very worried about doing it wrong and ruining my brand new tools before I even get to use them. Does anyone know of a good, thorough video tutorial that shows the proper way to sharpen my tools?

    submitted by /u/Lissy_Wolfe
    [link] [comments]

    Momma Bear and her 3 Cubs.

    Posted: 03 Nov 2020 12:59 AM PST

    How do I seal my project but keep the smooth wood texture?

    Posted: 03 Nov 2020 05:36 AM PST

    I have a piece of wood (birch, from the core of a green branch) and I'm carving something out of it. I really want it to keep it's natural smooth wood feel, instead of the almost plastic varnished finish. But it is fresh wood, and I'm worried about rot or cracking over time. Especially since I want to stain and paint parts of it using natural resources.

    submitted by /u/Ulfhethinn_9
    [link] [comments]

    Another my catbird (right) vs my dad's (left)

    Posted: 02 Nov 2020 12:08 PM PST

    Carving axe handle. Hickory. I hand carved this for an old axe head I found. Looking forward to some winter spoon carving!

    Posted: 02 Nov 2020 04:07 PM PST

    My first carving (fire nation emblem - avatar)

    Posted: 02 Nov 2020 04:05 PM PST

    looking to commission a figure like this (middle finger) - my friend had a wood carving like this from her dad and it was stolen. would like to get her a new one. could anyone give me a ballpark? thanks

    Posted: 02 Nov 2020 07:35 PM PST

    From my first post a couple people offord me to post my earlier works and i made this for gradmother she burned the wood (sorry dont have the not burned photo) And thanks to everyone for the criticism and edvise.

    Posted: 02 Nov 2020 11:39 AM PST

    Looking for advice/help with a wooden sign with epoxy inlay

    Posted: 02 Nov 2020 09:21 PM PST

    So for Christmas this year I would like to make my boyfriend a wooden sign with epoxy inlaid letters. I'm starting the process early because I know there's going to be a learning curve here and I want time to work out all the kinks/practice some techniques before crafting the final product

    I have some experience with basic carpentry, basic woodcarving, and done some finishing work (a couple of dining room tables). But I've never done this type of project. I have a few specific questions, but I'm also just open to any advice that anyone has for me!

    The general look I'm going for is a wooden sign (I think I'm going either walnut or maple) stained very dark, with red lettering, some gold and dark blue accents, finished with glossy poly.

    Questions-

    • I know the rough order of operations is: shape wood, carve letters, pour epoxy, cure, sand, finish. But, if I want to stain the wood do I need to do that before pouring the epoxy? Tape over the epoxy? Will the stain affect the epoxy?
    • If I'm doing different colors of epoxy does it make sense to do one color at a time and let it cure in between or pour all colors at once and have it cure once? Or does it not matter?
    • Does anyone have a certain epoxy/resin that they recommend for this sort of project? Looking for one that is hopefully on the cheaper side, as I know I need to practice a few times. Same goes for dye for the epoxy- what's your favorite? I'm looking for really bold colors, especially hopeful to find a very bright gold.

    Thank you and I appreciate any advice!

    submitted by /u/techmonkey3
    [link] [comments]

    dremel flex shaft installation [225-01]

    Posted: 02 Nov 2020 06:20 PM PST

    What is your favorite wood to carve?

    Posted: 02 Nov 2020 05:07 PM PST
    Read more
    at

    No comments:

    Post a Comment